Figure 15. Remove the power supply fix bracket
Screw specifications
M3 x L5
Go to
https://support.lenovo.com/partslookup
part:
Power supply fix bracket
Remove the power supply
Make sure the dock has been pulled out from the dock shell and the following FRU (or CRU) has been
removed.
"Remove the graphics card bracket" on page 22
"Remove the graphics card" on page 23
"Remove the MID support bracket" on page 23
"Remove the power supply fix bracket" on page 24
Step 1.
Disconnect the power supply connecters from the HDD and the system board and remove the two
screws. Then pull out the power supply.
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing an FRU or CRU
25