Ford MUSTANG MACH-E 2022 Owner's Manual page 292

Crash and Breakdown Information
5. Turn on the external power supply.
Note: Refer to the manufacturer's
instructions for external power supply use.
Note: If performed correctly, the front
luggage compartment latches immediately
release, and you have access to the front
luggage compartment.
6. Disconnect the external power supply
when it is no longer required.
7. To reinstall the cover, reverse the
removal procedure.
To Connect the Booster Cables
WARNING: Do not connect the
negative jumper cable to any other part
of your vehicle. Use the ground point.
To access the booster cable connection
points, remove the rear and left side front
luggage compartment covers. See
Installing and Removing the Luggage
Compartment Cover (page 278).
E338543 E338543
Note: Make sure that the cables are clear
of any moving parts.
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
4
. .
E338767
1. Connect the positive (+) jumper cable
to the positive (+) jump point of the
discharged battery vehicle.
2. Connect the other end of the positive
(+) jumper cable to the positive (+)
terminal of the booster vehicle battery.
3. Connect the negative (-) jumper cable
to the negative (-) terminal of the
booster vehicle battery.
E338540
4. Make the final connection of the
negative (-) jumper cable to the
negative (-) ground point of the
discharged battery vehicle.
288