FOLDING THE EXTERIOR
MIRRORS - VEHICLES WITH:
POWER FOLDING MIRRORS
Power-Folding Mirrors
To fold both mirrors, switch your vehicle
on, with the push button start in accessory
mode or your vehicle running.
For tight parking conditions,
press the control switch to fold
the mirrors.
Press the control switch again to unfold
the mirrors.
Note: Do not stop the mirrors midway
through their movement. Wait until the
mirrors stop moving and press the control
again.
Note: The left-hand and right-hand mirrors
move at different rates. For example, one
mirror may stop when the other one
continues to move. This is normal. Moving
the mirrors 10 or more times within one
minute, or repeated folding and unfolding
of the mirrors when holding the control
down during full travel, may disable the
system to protect the motors from
overheating. Wait approximately three
minutes with your vehicle running, and up
to 10 minutes with your vehicle off, for the
system to reset and operate as normal.
Loose Mirror
If the power-folding mirrors are manually
folded, they may not properly work even
after you re-position them. You need to
reset them if:
•
The mirrors vibrate when you drive.
•
The mirrors feel loose.
•
The mirrors do not stay in the folded or
unfolded position.
•
One of the mirrors is not in its normal
driving position.
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Exterior Mirrors
To reset the power-fold feature, use the
power-folding mirror control to fold and
unfold the mirrors. A loud noise could occur
when you reset the power-folding mirrors,
this sound is normal. Repeat this process
as needed each time the mirrors are
(If Equipped)
manually folded.
118
Need help?
Do you have a question about the MUSTANG MACH-E 2022 and is the answer not in the manual?