Switching Adaptive Cruise Control On And Off - Ford MUSTANG MACH-E 2022 Owner's Manual

Detection Issues Can Occur:
E71621
A When driving on a different line
than the vehicle in front.
B With vehicles that edge into your
lane. The system can only detect
these vehicles once they move
fully into your lane.
C There may be issues with the
detection of vehicles in front
when driving into and coming out
of a bend or curve in the road.
In these cases, the system may brake late
or unexpectedly.
If something hits the front end of your
vehicle or damage occurs, the
radar-sensing zone could change. This
could cause missed or false vehicle
detection.
2022 Mustang Mach-E (CGW) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Adaptive Cruise Control
223
Optimal system performance requires a
clear view of the road by the
windshield-mounted camera.
Optimal performance may not occur if:
• The camera is blocked.
• There is poor visibility or lighting
conditions.
• There are bad weather conditions.
SWITCHING ADAPTIVE
CRUISE CONTROL ON AND OFF
The cruise controls are on the steering
wheel. See Visual Search (page 25).
Switching Adaptive Cruise Control
On
Press the button to activate the
system. When the system
E144529
activates, the set speed is equal
to whichever is greater, the current vehicle
speed, or 15 mph when in imperial units or
20 km/h when in metric units. If the speed
is too low, or other conditions are not
correct for adaptive cruise control
activation, the system enters standby
mode. When you are below 15 mph when
in imperial units or 20 km/h when in metric
units, adaptive cruise control does not
activate unless you are following another
vehicle.
The indicator, current gap setting and set
speed appear in the instrument cluster
display.
Switching Adaptive Cruise Control
Off
Press the button when the
system is in standby mode or
E144529
switch the ignition off.
Note: When you switch the system off, the
set speed clears.