Table of Contents
Advertisement
Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP
are not available.
Preparation: Use the Capture feature to store JPEG or BMP files in a
PC card inserted into the projector's slot. Or store JPEG or BMP files in
a PC card inserted into your PC's slot and insert the PC card into the
projector's slot.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
3. Use the
button to select "Thumbnails" and then press the ENTER
button.
The Thumbnail screen will be displayed.
Slot 1
3 Files
_CAP_
_RESTORE
RECYCLED
1/3 0000.jpg
60KB
NOTE: To change highlight from the Thumbnails screen (right window) to a
directory tree (left window) , press the CANCEL button. To return highlight to
the Thumbnails screen, press the ENTER button.
4. Use
button to select a JPEG or BMP file (slide) for your back-
ground logo.
5. Press the MENU button to display the Viewer menu.
0000.jpg
0001.jpg
0002.jpg
select : ENTER
6. Use the
button to select "Logo" and then press the ENTER button.
A confirmation dialog box will be displayed.
7. Use the
button to select "OK" and press the ENTER button. This
completes changing a logo for the background.
* Once you have changed the background from the NEC logo to an-
other, you cannot return the logo to background even by using Fac-
tory Default.
E-42
Advertisement
Table of Contents
