Connecting Your Dvd Player - NEC HT1100 User Manual

Connecting Your DVD Player

Audio cable
(supplied)
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use the supplied component video cable (RCA 3) to connect your DVD player to
the COMPONENT IN connectors on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of
the DVD player to the Video Input of the projector.
Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc
player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,
Component video RCA 3 cable
(supplied)
DVD player
AUDIO OUT
R L
COMPONENT
AUDIO IN
COMPONENT IN
VIDEO VIDEO S-VIDEO S-VIDEO COMPONENT RGB/DVI RGB/DVI AUDIO IN AUDIO IN SC TRIGGER
PC CONTROL VIDEO IN S-VIDEO IN Y Cb/Pb Cr/Pr DVI-D IN
COMPUTER IN
Audio Equipment
COMPONENT OUT
Audio cable (not supplied)
E-15
AUDIO IN
L R