Making Connections; Wiring Diagram - NEC HT1100 User Manual

Making Connections

Wiring Diagram

Video Game
PC CONTROL
Component video cable
(RCA 3)
(Supplied)
DVD Player
(with component output)
NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most
cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.
* If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.
VCR, DVD Player or
LaserDisc Player
VIDEO VIDEO S-VIDEO S-VIDEO COMPONENT RGB/DVI RGB/DVI
VIDEO IN S-VIDEO IN
Y Cb/Pb Cr/Pr
Macintosh
(Desktop type or notebook type)
E-13
Set top box
To video, S-video,
and audio inputs
on the projector.
AUDIO IN AUDIO IN SC TRIGGER
DVI-D IN
COMPUTER IN
IBM VGA or Compatibles
(Desktop type or notebook type)
RGB Signal cable (supplied)
To mini D-Sub 15-pin connector on
the projector. It is recommended
that you use a commercially avail-
able distribution amplifier if con-
necting a signal cable longer than
the supplied cable.