Related Manuals for NEC HT1100
Summary of Contents for NEC HT1100
- Page 1 HT1100 Entertainment Projector English User’s Manual Deutsch Français Italiano Español Svenska...
-
Page 2: Important Information
IMPORTANT INFORMATION Safety Cautions Precautions Please read this manual carefully before using your NEC HT1100 Pro- jector and keep the manual handy for future reference. Your serial num- ber is located on the bottom of your projector. Record it here:... -
Page 3: What's In The Box
8. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire. 9. If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet. -
Page 4: Table Of Contents
Returning to Factory Default [Reset] ... E-37 USING THE VIEWER ... E-38 Making the Most out of the Viewer Function ... E-38 Operating the Viewer Function from the Projector (playback) ... E-39 Changing Background Logo ... E-42 MAINTENANCE ... E-43 Replacing the Lamp ... -
Page 5: Introduction
DVD player, VCR, satellite hookup, HDTV source, PC or Macintosh computer (desktop or notebook) and images from your digital camera. The HT1100 can be setup on a coffee table, tabletop, cart, bookshelf or permanently installed* . With an extensive input panel, quick connect guide and full function remote, you will be ready to im- merse yourself in big screen enjoyment. -
Page 6: Part Names Of The Projector
When you plug the supplied power cable into an active wall outlet and turn on the Main Power switch, the POWER indicator turns orange and the projector is in standby mode. (See page E-18) 2. Use the rivet to attach the string to the bottom of the projector. -
Page 7: Top Features
Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode (Power-saving mode or Idle mode). NOTE: To turn on or off the projector, press and hold this button for a mini- mum of two seconds. 2. STATUS Indicator... -
Page 8: Terminal Panel Features
Use this port to connect your PC to control your projector via a serial cable. This enables you to use your PC and serial communication protocol to control the projector. The NEC optional serial cable (CA03D) is required to use this port. If you are writing your own pro- gram, typical PC control codes are on page E-50. -
Page 9: Part Names Of The Remote Control
Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode (Power-saving mode or Idle mode). To turn on or off the projector, press and hold this button for a mini- mum of two seconds. 3. LIGHT Button Use this button to turn on or off the button’s backlight. -
Page 10: Battery Installation
22 feet / 7 m and within a 55°(Front) / 60°(Rear) angle of the remote sensor on the projector cabinet. • The projector will not respond if there are objects between the re- mote control and the sensor, or if strong light falls on the sensor. -
Page 11: Installation And Connections
30" (0.8 m) measured diagonally when the projector is roughly 4 feet (1.0 m) from the wall or screen. The largest the image can be is 200" (5.08 m) when the projector is about 23 feet (7 m) from the wall or screen. Use the drawing below as a guide. -
Page 12: Throw Distance And Screen Size
Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart Screen Height Screen Size Diagonal Width Height Wide – Tele inch... -
Page 13: Making Connections
(with component output) NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector. -
Page 14: Connecting Your Vcr Or Laser Disc Player
2. Connect one end of the composite video cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). -
Page 15: Connecting Your Dvd Player
Component video RCA 3 cable (supplied) You can connect your projector to a DVD player with component output or Video output. To do so, simply: 1. Turn off the power to your projector and DVD player. 2. If your DVD player has the component video (Y,Cb,Cr) output, use the supplied component video cable (RCA 3) to connect your DVD player to the COMPONENT IN connectors on the projector. -
Page 16: Connecting Your Pc Or Macintosh Computer
IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type) NOTE: The HT1100 is not compatible with video decoded outputs of NEC ISS- 6020 and ISS-6010. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. -
Page 17: When Viewing A Dvi Digital Signal
Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI-D signal cable while the projector is running. If the signal cable has been disconnected and then re-connected, an im- age may not be correctly displayed. -
Page 18: Projecting An Image (Basic Operation
• The projector has two power switches: main power switch and POWER but- ton. • The projector has a feature to prevent itself from being used by unauthorized individuals. To use this feature, register your PC card as a protect key. See "Security"... -
Page 19: Selecting A Source
1. Lift the front edge of the projector. Adjustable Tilt Foot Lever 2. Push up the Adjustable Tilt Foot Lever on the front of the projector to extend the adjustable tilt foot (maximum height). 3. Push down the Adjustable Tilt Foot Lever. -
Page 20: Correcting The Horizontal And Vertical Keystone Distortion (3D Reform
The rear foot height can be changed. Rotate the rear foot to the desired height, but the vertical distance from the bottom to the desk or floor should be 1" (25 mm) to make the projector horizontal on the flat sur- face. -
Page 21: Optimizing Rgb Picture Automatically
5. Press the ENTER button. 6. Use the SELECT button to move the projected image frame as shown on the example. 7. Press the ENTER button. Screen 8. Use the SELECT button to select another icon which points in the direction. Screen On the Cornerstone adjustment screen, select “Exit”... -
Page 22: Turning Up Or Down Volume
Turning Up or Down Volume Sound level from the speaker on the projector can be adjusted when the menu is not displayed. POWER LIGHT COMPONENT VIDEO S-VIDEO COMP.V COMPUTER COMP. decrease volume increase volume ENTER MENU CANCEL decrease volume increase volume... -
Page 23: Convenient Features
Stadium NOTE: A “_CAP_” folder will be created and a captured image will be stored Available in the PC card inserted into the projector's slot. Not available 3. Select “Exit” or press the CANCEL button to end the CAPTURE screen. -
Page 24: Enlarging And Moving A Picture
Enlarging and Moving a Picture You can enlarge the area you want up to 400 percent. To do so: To enlarge the image: 1. Press the MAGNIFY(+) button. 2. Press the MAGNIFY(–) button to return to its original size. To enlarge the image: Use the SELECT button to move the enlarged portion. -
Page 25: Using On-Screen Menu
2. Press the SELECT buttons on the remote control the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the SELECT buttons on the remote control or the projector cabinet to select the item you want to adjust or set. -
Page 26: Menu Tree
Menu tree Main menu Submenu Preset Picture Reference Brightness Contrast Color Sharpness Noise Reduction Detail Settings Page 1 Page 2 Page 3 Page 4 Image Page 1 Page 2 Items 1 to 5 Video, Movie, Game, sRGB, Graphic Off, Low, Medium, High Dynamic, Natural, Black Detail Gamma Correction 5000, 5400, 6000, 6500, 7000, 7800, 8500, 9300, 10500... - Page 27 Source Name, Input Terminal, Entry No., Horizontal Frequency, Vertical Frequency Information Page 2 Signal Type, Video Type, Sync Type, Interlace, Sync Polarity Page 3 Remaining Lamp Time, Lamp Hour Meter, Projector Usage Page 4 Version (BIOS, Firmware, Data) Reset Current Signal, All Data, All Data (Including Entry List)
-
Page 28: Menu Elements
Menu Elements Solid triangle Highlight Slide bar Menu bar (Main menu) Radio button Check box Cancel button OK button Menu windows or dialog boxes typically have the following elements: Highlight ... Indicates the selected menu or item. Solid triangle ... Indicates further choices are available. A highlighted triangle indicates the item is active. Tab ... -
Page 29: Menu Descriptions & Functions
Menu Descriptions & Functions Picture [Preset] This option allows you to adjust neutral tint for yellow, cyan or magenta. There are 5 factory presets optimized for various types of images, you can set user adjustable settings. Selecting Reference Setting [Reference] This feature allows you to use color correction or gamma values as reference data to optimize for various types of images. -
Page 30: Image [Page 1
See page E-23 for setting image positions. Copyright Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with an "Aspect Ratio"... - Page 31 When screen size 4:3 is selected for the source, the following selections will display. DVD progressive input 480i/576i mode These are the same signals. Normal Zoom Cinema V-Zoom When screen size 16:9 and Anamorphic (*) are selected for the source, the following selections will display. DVD progressive input 480i/576i...
-
Page 32: Image [Page 2
[Entry List] Displays the list of the entry signals. Use the SELECT your remote control or the projector cabinet to select the signal and press the ENTER button on the remote control or the projector cabinet buttons until the band- to display the Entry Edit Command screen. -
Page 33: Setup [Page 1
To reset the lamp usage hour, press "OK". NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. In this condition you cannot clear the lamp hour meter on the menu. -
Page 34: Setting Auto Adjust
Setup [Page 3] Setting a Password [Password (Logo)] A password can be set for your projector to avoid operation by an unau- thorized person. When a password is set, doing any one of the following two operations will display the Password input screen. - Page 35 This option notifies your computer of an error message via e-mail when using wired LAN. The error message will be notified when the projector lamp has reached the end of its usable life or an error oc- curs in the projector.
-
Page 36: Security
3. Enter your keyword in the Release Code input screen. You can view the projected image. NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release Code. See more information at the end of this section. -
Page 37: Information
The PC card data will be deleted. If you've lost your registered PC card, proceed as follows: NOTE: NEC or your dealer will provide you with your Release Code in exchange for your registered keyword and Request Code. See more information at the end of this section. -
Page 38: Using The Viewer
Features You can view graphic data, captured images, and play images on the projector. A PC memory card (referred to as PC card in this manual) is used to view data prepared on the computer and to capture and play images projected with the projector. -
Page 39: Operating The Viewer Function From The Projector (Playback
Projecting slides (Viewer) Preparation: Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector’s slot. Or store JPEG or BMP files in a PC card inserted into your PC’s slot. 1. Insert a PC card into the PC card slot of the projector. - Page 40 NOTE: * Signals from DVI input are not possible to be captured. * Unless a PC card is inserted into the PC Card slot of the projector, the Capture feature is not available. * The "Card Error" display means that the free space of the PC card is insufficient for saving images.
- Page 41 To delete captured images: Preparation: Make sure that the PC card is inserted into the PC card slot of the projector. 1. Press the VIEWER button on the remote control to display an image. 2. Press the MENU button to display the Viewer menu.
-
Page 42: Changing Background Logo
A confirmation dialog box will be displayed. 7. Use the completes changing a logo for the background. * Once you have changed the background from the NEC logo to an- other, you cannot return the logo to background even by using Fac- tory Default. -
Page 43: Maintenance
Interlock 4. Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION: Do not use a lamp other than the NEC replacement lamp (LT60LPK). 5. Secure it in place with the two screws. Be sure to tighten the screws. -
Page 44: Cleaning
CAUTION: Use only transparent lens protectors designed for lens protection. Use of filters for light reduction and special effects, such as ND (Neutral Density) filters and color filters, can absorb heat, resulting in damage to the filter and the projector. E-44... -
Page 45: Troubleshooting
TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector. Power Indicator Indicator Condition Blinking light Green 0.5 sec On, 0.5 sec Off Orange 0.5 sec On, 0.5 sec Off Steady light Green... - Page 46 Digital Visual Interface (DVI). If you are unable to view material via the DVI input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
-
Page 47: Specifications
SPECIFICATIONS This section provides technical information about the HT1100 Projector's performance Model Number HT1100 Optical Single Chip Digital Micromirror Device (DMD) Resolution 1024 768 pixels up to 1080p (1920 1080) with Advanced AccuBlend Lens Manual zoom and focus: F2.5 – 2.7 f = 22.2mm – 26.7mm... -
Page 48: Appendix
APPENDIX Cabinet Dimensions 92 (3.6") 120.5 (4.74") Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level 120 (4.72") 260 (10.24") Pin No. RGB Signal (Analog) Green or Sync on Green Blue Ground... -
Page 49: Compatible Input Signal List
Compatible Input Signal List Signal Resolution Program ( Dots ) NTSC – – PAL60 – SECAM – VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 1024 VESA 1024 VESA 1024 1024 VESA 1024 VESA 1024 VESA 1152 1152 VESA 1280 VESA... -
Page 50: Pc Control Codes And Cable Connection
To RxD of PC To GND of PC To TxD of PC NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector. Using Software Keyboard 1 to 0 and Characters ... Use to type in IP address or projector name SP ... -
Page 51: Operation Using An Http Browser
IP address of the projector has been registered to the domain name server by a network administrator, or the host name corresponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used. -
Page 52: Travelcare Guide
TravelCare Guide TravelCare - a service for international travelers This product is eligible for "TravelCare", NEC's unique international war- ranty. Please note that TravelCare coverage differs in part from coverage un- der the warranty included with the product. Services offered with TravelCare... - Page 53 +886 2 8500 1420 Email Address: nickliao@nec.com.tw WEB Address: http://www.nec.com.tw (Regions Covered) Taiwan NEC Solutions Asia Pacific Pte. Ltd Address: 401 Commonwealth Drive, #07-02, Haw Par Technocentre, Singapore 149598 Telephone: +65 6 273 8333 Fax Line: +65 6 274 2226 Email Address: tehgh@rsc.ap.nec.com.sg...
- Page 54 Date: TO: NEC or NEC’s Authorized Service Station: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don’t return the Loan units within the specified period.
- Page 55 3) Any fault in the attachments or associated products or components (whether or not supplied by NEC or its agents which do not form part of the Product covered by this warranty); 4) Any act of God, fire, flood, war, act of violence or any similar occur- rence;...
- Page 56 Screen Type to "4:3" using the menu. This is because the projector's Screen Type is set to 16:9 at the factory and the computer will not display 4:3 signals such as an XGA (1024 x 768) and SVGA (800 x 600).
-
Page 57: Limited Warranty
5. In the event a product is returned to NEC Solutions for warranty service, and it is determined that there is no product defect or that the product condition is not covered by this limited warranty, a diagnostic service fee may be charged to the customer. -
Page 58: Declaration Of Conformity
Type of Product: Equipment Classification: Models: We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules. NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 Projector...