Welcome; Introduction; Specifications - Wen TT0811 Instruction Manual

Thanks for purchasing the WEN Table Saw. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator's manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not
substitutes for proper accident prevention measures.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
Model Number
Motor
No-Load Speed
Blade Model Number
Blade Size
Arbor Size
Kerf & Teeth
Table Size
Cutting Range
Cutting Capacity
Dust Port Size
Weight
Product Dimensions

INTRODUCTION

safety for both yourself and others.

SPECIFICATIONS

TT0811
120V, 60 Hz, 11A
4500 RPM
BL0824
8.25 Inches
5/8 Inch
2.1mm, 24T
18.4" x 18.9" x 1.6"
0° to 45°
90°: 2.75 Inches
45°: 2 Inches
1.4 Inches (35mm)
28.9 Pounds
22 in. x 23 in. x 11-3/8 in.
37.5" Wide Fully Extended
3