Setting The Picture Size For Rgb Input Signals; Setting The Signal And Black Level For Dvi Signal - NEC PlasmaSync 42XM2 Operation Manual

Information
S1/S2 settings
AUTO .....Adjusts the screen size automatically
according to the S1/S2 video signal.
OFF ....... Turns the S1/S2 function off.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.

Setting the picture size for RGB input signals

Use this procedure to switch the setting to "ON" or "OFF".
* Cannot be set in some models.
Example: Setting the "PICTURE SIZE" mode to
"OFF"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the and buttons to select "PICTURE SIZE".
3. To set PICTURE SIZE mode to "OFF"...
Use the and buttons to select "OFF".
The mode switches as follows each time the
button is pressed:
ON OFF
OPTION2
PREVIOUS PAGE
POWER MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
NEXT PAGE
SEL. ADJ.
Information
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or
2 / 3
: OFF
: ON
: 3
: OFF
: OFF
EXIT RETURN
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
This setting is possible only in the HDCP compatible
(silver bezel) model.
Example: Setting the "PLUG/PLAY" mode to "STB/
DVD"
Set "ADVANCED OSM" to "ON" in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select "OPTION2", then press
the MENU/ENTER button.
The "OPTION2" screen appears.
2. Use the and
then press the MENU/ENTER button.
The "DVI SET UP" screen appears.
3. To set PLUG/PLAY mode to "STB/DVD"...
Use the and buttons to select "STB/DVD".
The mode switches as follows each time the
button is pressed:
PLUG/PLAY:
PC
BLACK LEVEL:
LOW
PLUG/PLAY
BLACK LEVEL
SEL.
Information
PLUG/PLAY settings
PC .............. When connected to the PC signal.
BLACK LEVEL is set to "LOW"
automatically.
STB/DVD ... When connected to the SET TOP BOX,
DVD etc.
BLACK LEVEL is set to "HIGH"
automatically.
BLACK LEVEL settings
LOW ........... When connected to the PC signal.
HIGH .......... When connected to the SET TOP BOX,
DVD etc. Change "HIGH" into "OFF"
if the black level appears gray.
31
buttons to select "DVI SET UP",
STB/DVD
HIGH
DVI SET UP
: STB/DVD
: HIGH
EXIT
ADJ. RETURN
or