NEC PlasmaSync 42XM2 Operation Manual page 36

Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts
in 2 hours and proceeds for one hour and a half.
Perform Steps 1-3 of INVERSE, then...
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
THE "INVERSE/WHITE" screen appears.
5. Adjust the time using the
The mode switches as follows each time the
button is pressed:
• WORKING TIME
ON 00H03M 00H06M
• WAITING TIME
00H03M 00H06M 00H09M
INVERSE/WHITE
WORKING TIME
WAITING TIME
SEL. ADJ.
Information
Setting the time
WORKING TIME ..... Set
"INVERSE/WHITE".
When the WORKING TIME is set
to "ON" the mode will stay on.
WAITING TIME ...... Set the standby time until the
"INVERSE/WHITE" mode starts.
* The "WAITING TIME" can not be set when the
"WORKING TIME" is ON.
* THE "WORKING TIME" and "WAITING TIME" can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
* Ending a WORKING TIME function, the monitor will
be STAND BY.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
2 H
Start
To select "ON" for the "WORKING TIME"...
Set the hours of the working time to 0H and the minutes
to 0M. "ON" will be displayed.
and buttons.
or
..... 12H42M 12H45M
... 12H42M 12H45M
: 01H30M
: 02H00M
EXIT RETURN
the time duration for
1.5 H
INVERSE/WHITE Start STAND BY
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting "SCREEN WIPER" to "ON"
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select "SCREEN WIPER".
4. Use the and buttons to select "ON".
The mode switches as follows each time the
button is pressed:
OFF ON
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
SEL.
Information
SCREEN WIPER
ON ......... The white vertical bar appears.
You can set the time by pressing the MENU/
ENTER button while "ON" is set.
OFF ....... Screen wiper mode does not function.
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting to that the SCREEN WIPER mode
starts in 30 minutes and proceeds for one hour and
a half.
Perform Steps 1-3 of SCREEN WIPER, then...
4. Use the and buttons to select "ON", then press the
MENU/ENTER button.
THE "SCREEN WIPER" screen appears.
5. Adjust the time and speed using the
The mode switches as follows each time the
button is pressed:
• WORKING TIME
ON 00H03M
• WAITING TIME
00H03M 00H06M
• SPEED
1 2 3 4
WORKING TIME
WAITING TIME
SPEED
SEL.
29
LONG LIFE
: AUTO
: OFF
: OFF
: ON
: OFF
ADJ. EXIT RETURN
and
00H06M ..... 12H42M 12H45M
00H09M ... 12H42M
5
SCREEN WIPER
: 01H30M
: 00H30M
: 3
ADJ. EXIT RETURN
or
buttons.
or
12H45M