Gigabyte MB12-CE0 User Manual page 65

Parameter
SATA Configuration
(continued)
Description
Controller 3 SATA Configuration
Š
– SATA Configuration
» Enable/Disable SATA device.
» Options available: Enabled, Disabled. Default setting is Enabled.
– SATA Port 0
» Port 0
• Options available: Enabled, Disabled. Default setting is
Enabled.
» Hot Plug
• Options available: Enabled, Disabled. Default setting is
Enabled.
» Spin Up Device
• Options available: Enabled, Disabled. Default setting is
Disabled.
BIOS Setup
- 65 -