Adding Your Sensor To; Manually Add Sensor To - La Crosse Technology V16 Setup Manual

LA CROSSE VIEW
Add Your Sensors to the App
12 34
100%
Cancel Add Device Save
2
Please wait up to 15 minutes
for your additional devices
to connect to your account.
Check the notification icon when
Manually Add Your Sensor to the App*
your devices are ready to add.
If you do not receive device
1. Open your La Crosse View app. On the Main Menu, scroll to
notifications, go to the Main Menu
and select Add/Edit Devices to
ADD/EDIT and select DEVICES.
add your devices separately.
2. On the Devices page, select the ADD DEVICE or PLUS (+) button.
3. Scan the Barcode on your Sensor or type in the Device ID
manually.
4. Confirm the sensor image and Device ID and add a Device
Name and Location Name. Select DONE.
* This step is only required if you do not receive the Add Device notification within the app.
05
Prior to mounting/positioning your sensor, make sure your station is receiving sensor data.
Upon getting the station connected to your Wi-Fi network, the app will
explain how your connected sensor should be brought in. Within the
next 15 minutes, you should receive an Add Device notification in your
app. This is indicated by the Red Cloud and the numbers inside of it.
Tap this icon to begin adding your sensor into the app.
Back of Sensor
123456-ABC