Moen INS2321B Installation Instructions Manual page 4

3
预安装
1. 用排污连接直管连接坐便器的排污孔，再与墙面
的排污管连接。
2. 整好坐便器的位置，用记号笔在安装孔的位置做
标记，并描出马桶底面轮廓。
Preinstallation
1. Connect the waste pipe with the drain hole of the
toilet, and then connect it with the drain pipe on the
wall.
2. Adjust the position of the toilet, mark the position of
installation hole with a marker, and trace the outline
of the toilet bottom.
5
安装排污连接直管，并将供水软管一端与进水阀连接
Connect the waste pipe, and connect supply hose to
inlet valve of toilet
*在密封圈上涂抹硅脂。
*Apply silicon grease
on seal ring.
4
用电钻在安装孔的标记处钻孔。
警告：请佩戴防护镜并注意安全。确保钻孔的地方没有隐藏的
电缆或管路！
Drill hole according to the position of the installation hole
marked by the marker pen.
Warning: Please wear protective goggles. Make sure there is
no pipeline or cable buried in any position that needs to be
punched.
安装塑料膨胀管，螺栓和螺帽。
Install expansion tubes, screw bolts, and screw caps.
螺丝切勿锁太紧，防止陶瓷开裂。
Do not overtighten the screws to prevent the
ceramic from cracking.
4