Quick Start - NEC MultiSync P1250 User Manual

Quick Start cont.
the BNC connector on the monitor labeled HS/CS. If you have a fifth BNC connector
(Vertical Sync), connect it to the BNC connector on the monitor labeled VS (Figure D.1).
NOTE: Incorrect cable connections may result in irregular operation or damage
display components.
Figure B.2
R G(/Sync) B
Figure D.1
4. Connect one end of the power cord to the MultiSync
end to the power outlet (Figure E.1).
5. Turn on the monitor (Figure F.1) and the computer.
NOTE: For download information on the Windows
P + monitor, refer to the References section of this user's manual.
1250
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User's Manual.
78133694
HS/CS
VS
PROCEED RESET BNC/D-SUB SW
OL
Figure F.1
6
Figure C.2
Power Outlet
BNC
Connector
Power
Cord
Figure E.1
P +
® ™
1250
95/98 INF file for your MultiSync
®
MultiSync P
1250+
4
11/18/98, 11:34 AM
monitor and the other
Power Button