50XR4 Installation Guide
50" Plasma Display
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below is the maximum angle that the display can be tilted
Screen Surface: Anti-Reflective
Color Correction: NEC CCF (Capsulated Color Filter, in panel)
NEC Solutions (America), Inc.
Visual Systems Division
and AccuCrimson (in front filter)
48.1"(W) x 29.0"(H) x 3.8"(D)
Page 1 of 10