Data Of Each Sensor Separately; Data Of All Paired Sensors - 3scort BA-BLE 5.0 LR User Manual

ATTENTION! For this configuration to work, be sure to save the tank calibration table of up to 50
lines in the TD-BLE's memory. You need to see the average of the fuel in liters/gallons as by default
the sensor transmit their LEVEL reading in units from 1 to 1023 or from 1 to 4095.
See more on that in the

Data of each sensor separately

If this mode/format is selected, the readings of every sensor is transmitted in the one-by-one fashion.

Data of all paired sensors

If this mode is activated, the ASCII strings transmitted by the BA-BLE can include more parameters per
sensor than if the Data of all paired sensors in the LLS format (ASCII strings) mode is selected as the LLS format
and its structure no longer impose the limit of just 1 pair of parameters per sensor.
ESCORT. BLUETOOTH BASE BA-BLE 5.0 LR
User Manual 2022.02-24. Page 25 of 38
TD-BLE User Manual (art. Additional Features, p.53).
Fig. 35 Data of each sensor separately