Connecting And Disconnecting Ble Sensors With Ba-Ble - 3scort BA-BLE 5.0 LR User Manual

Fig. 8 List of available devices
2.3.7 Once the Device is connected, you will see the menu with its current data (Fig. 10). Here
you can pair a new sensor with the BA-BLE by pressing the "+" or delete a paired sensor.

Connecting and disconnecting BLE sensors with BA-BLE

2.3.9 Once you press the "+" button, you will be asked to enter the BA-BLE password (Fig. 10).
Enter the password (it can be 10-digit long) and press "Enter".
Then press the "+" button again. You will be asked to enter the MAC address or the name of
the sensor (Fig. 12).
Important. The sensor can be paired either by its MAC address or by its name. In other words,
if you entered the MAC address, the BA-BLE will be searching for the sensor's data by its MAC address.
The MAC address must be entered as follows: FF:FF:FF:FF:FF:FF (the ':' signs are obligatory).
The formatting must correspond to the example on the Figure 11. The sensor's MAC address
can be found on its head (Fig. 12).
To pair the sensor by its name, enter the first letter of the sensor's model and the last 6 digits
of its serial number - for example, TD_151815 - and press "Connect".
After the sensor is paired by its MAC address or name, you will see a message that informs of
the sensor being successfully paired with the Device (Fig. 13). Then the current readings received from
the paired sensor will be displayed in the main menu of the BA-BLE.
ESCORT. BLUETOOTH BASE BA-BLE 5.0 LR
User Manual 2022.02-24. Page 11 of 38
Fig. 9 Device's current data