3scort BA-BLE 5.0 LR User Manual page 21

The ASCII string will look similar to the example on Figure 28.
On the left is the list of the sensors paired with the BA-BLE. They are ordered from 0 to 2.
Thus, the sensors are counted from 0 to 9 from top to bottom in the BA-BLE menu and their number
on the list defines the order of the parameters in the ASCII string.
Parameters F, T and N are used to transmit different parameters depending on the sensor's
model.
Table 3. F, T, N parameters and sensor models (if the main parameter selected in case of every
sensor model as explained on the page 19 above)
F
T
N
ESCORT. BLUETOOTH BASE BA-BLE 5.0 LR
User Manual 2022.02-24. Page 21 of 38
Fig. 28 ASCII string example
Parameters F0, T0, N0 belong to the Sensor 0.
Parameters F1, T1, N1 belong to the Sensor 1.
Parameters F3, T3, N3 belong to the Sensor 2, etc.
TD-BLE (TW-BLE
CNT (not used in the
majority of cases)
Temperature
Fuel level
DU-BLE
-
RPM/Event
notification
Angle/Revolutions
counter
TH-BLE
-
Temperature
Humidity