Table of Contents
Advertisement
After changing any RS-232 settings, be sure to press the Save button to apply the changes.
2.4. RS-232 modes with data output examples
Figure 25 displays the list of the modes of periodic transmission of data in the LLS format.
ATTENTION! For any of the RS-232 periodic modes/formats to work properly, the GPS
tracker/gateway must be configured to work in a so-called 'Transparent mode' that allows it to
simply retransmit the data received from the BA-BLE without processing it.
ATTENTION! Be sure to check if the monitoring platform you use is capable of processing the
data packages transmitted by the GPS tracker/gateway in the 'Transparent mode' that include the
BA-BLE data output.
Data of all paired sensors in the LLS format (ASCII strings)
If you select the Data of all paired sensors in the LLS format (ASCII strings), the menu of the
sensor will display two separate buttons for RS-485 and RS-232 (Fig. 26):
− RS-232 button for selecting a pair of parameters to be actively/periodically transmitted
in the LLS format via the RS-232.
− RS-485 button opens the LLS network addresses configuration
The sensor parameters menu when the active/periodic transmission of data in the LLS format
via the RS-232 is activated is displayed on Figure 26.
ESCORT. BLUETOOTH BASE BA-BLE 5.0 LR.
User Manual 2022.02-24. Page 18 of 38
Fig. 24 RS-232 Modes/Formats
Advertisement
Table of Contents
