Average Fuel Reading And Averaged Temperature Reading Of Td-Ble Sensors In The Same Tank - 3scort BA-BLE 5.0 LR User Manual

Fig. 31 ASCII data output example (total fuel level by several sensors and averaged temperature)
ATTENTION! For this configuration to work, be sure to save the tank calibration table of up to 50
lines in the TD-BLE's memory. You need to see the total of the fuel in liters/gallons as by default the
sensor transmit their LEVEL reading in units from 1 to 1023 or from 1 to 4095.
See more on that in the

Average fuel reading and averaged temperature reading of TD-BLE sensors in the same tank

This format/mode allows for the BA-BLE to calculate the average fuel reading reported by 2 or
more TD-BLE sensors installed in the same tank.
The temperature readings of the TD-BLE is averaged as well.
The data of any other sensor that is not a TD-BLE is ignored.
This mode can be used if there is only one TD-BLE connected.
ESCORT. BLUETOOTH BASE BA-BLE 5.0 LR
User Manual 2022.02-24. Page 23 of 38
TD-BLE User Manual (art. Additional Features, p.53).