A7225Aa & A7227Aa; A7224Aa & A7697Aa - Ideal-Standard Ceratherm T50 Installation Instructions Manual

8.2 A7225AA & A7227AA
Right handle controls the 3 function diverter
• This handle is shown above parked in the off position (giving no flow at this position).
• Rotating this handle downwards from the parked position, commences water flow & will direct water
to the bottom outlet of the mixer. Thus activating the shower hand set only.
• By rotating the handle 45° from the off position the user will encounter economy flow "stop" delivering
about 50% of the maximum flow rate achievable through this product.
• To obtain greater flow rate, press (& hold) the right button & rotate this handle further downwards.
The handle will rotate further to the maximum flow stop.
• Rotating this handle upwards from the parked position, commences water flow & will direct water to
the top outlet. This will activate the large overhead shower plate.
• At each position the user can feel a soft click to indicate position. Total handle rotation is about 180°.
• The diverter permits one outlet to be opened at any one time, simultaneously closing the second
outlet.
8.3 A7224AA & A7697AA
DO NOT FORCE HANDLES BEYOND THE DESCRIBED MOVEMENT RANGE OTHERWISE THIS
MAY RESULT IN DAMAGE TO BOTH VALVES AND HANDLES.
+
Q=50%
Q=100%
+
The diverter on the bath shower
mixers works on the same princi-
ple as above, but diverts between
bath fill & hand shower outlets.
20
Q=0%