Dell Vostro 3020 Service Manual page 65

Table 14. System setup options—Keyboard menu (continued)
Keyboard
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warnings and Errors
Warnings and Errors
Fastboot
Fastboot
Extend BIOS POST Time
Extend BIOS POST Time
Table 16. System setup options—Virtualization menu
Virtualization
Intel® Virtualization Technology
Enable Intel® Virtualization Technology
(VT)
VT for Direct I/O
Enable Intel® VT for Direct I/O
Table 17. System setup options—Performance menu
Performance
Multi-Core Support
Active Cores
Intel® SpeedStep
Enables or disables report of keyboard-related errors when the computer
boots.
Default: ON
Enables or disables Numlock when the computer boots.
Default: ON
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input
when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization
during boot.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds
Enables the computer to run a virtual machine monitor (VMM).
Default: ON
Enables the computer to perform Virtualization Technology for Direct I/O (VT-
d). VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON
CPU core disabling is not supported with current BIOS version. Changes the
number of CPU cores available to the operating system. The default value is
set to the maximum number of cores.
Default: All Cores
BIOS setup 65