Dell Vostro 3020 Service Manual page 58

Table 3. System setup options—System information menu (continued)
Overview
DIMM 1 Size
DIMM 2 Size
DEVICES
Video Controller
Video Memory
Wi-Fi Device
Native Resolution
Video BIOS Version
Audio Controller
Bluetooth Device
LOM MAC Address
Slot 2
Slot 3
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Boot Sequence
Secure Boot
Enable Secure Boot
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
58 BIOS setup
Displays the DIMM 1 memory size.
Displays the DIMM 2 memory size.
Displays the video controller type of the computer.
Displays the video memory information of the computer.
Displays the wireless device information of the computer.
Displays the native resolution of the computer.
Displays the video BIOS version of the computer.
Displays the audio controller information of the computer.
Displays the Bluetooth device information of the computer.
Displays the LOM MAC address of the computer.
Displays the status of the expansion slot (Slot 2) of the computer.
Displays the status of the expansion slot (Slot 3) of the computer.
Displays the boot mode of this computer.
Specifies the order that the BIOS searches the list of devices to find an
operating system to boot.
By default, UEFI Hard Drive 2 is selected
By default, Windows Boot Manager is selected
By default, UEFI Hard Drive is selected
By default, ONBOARD NIC (IPV4) is selected
By default, ONBOARD NIC (IPV6) is selected
By default, UEFI HTTPS Boost is selected
Enables secure boot using only validated boot software.
Default: OFF
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures. Deployed Mode should be selected for normal operation
of Secure Boot.
By default, Deployed Mode is selected.
Allows the PK, KEK, db, and dbx security key databases to be modified.
Default: OFF
NOTE: If Custom Mode is not enabled, any changes that are made with
respect to the keys will not be saved.
Allows for selection of key database.
● Save to File will save the key to a user-selected file.
● Replace from File will replace the current key with a key from a user-
selected file.