Steps
1. Align and insert the tabs on the front cover into the slots on right side of the chassis.
2. Rotate the front cover towards the chassis and snap the tabs on the front cover into place.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Hard drive
Removing the 2.5-inch hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
cover.
About this task
The following image indicates the location of the 2.5-inch hard drive and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
cover.
computer.
computer.
Removing and installing components
13