Dell Vostro 3020 Service Manual page 60

Table 6. System setup options—Storage menu
Storage
SATA Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Drive Information
Enable MediaCard
Table 7. System setup options—Display menu
Display
Primary Display
Video Primary Display
Full Screen Logo
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth®
Enable UEFI Network Stack
Enable UEFI Network Stack
60 BIOS setup
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID. (Intel® Rapid
Restore Technology)
Enables or disables the onboard drives.
Default: SATA-0 is ON
Default: SATA-1 is ON
Default: SATA-3 is ON
Default: M.2 PCIe SDD-0 is ON
Enable or disable SMART Reporting during system startup.
Default: OFF
Displays the information of various onboard drives.
Turn on or off all media cards, or enable or disable the media card in read-only
state.
By default, Secure Digital (SD) Card is selected.
Set or change the primary video controller when multiple controllers are
available in the system.
By default, Auto is selected.
Displays the full screen logo if the screen resolution matches the image of the
logo.
Default: OFF
Controls the onboard LAN controller.
By default, Enable with PXE is selected.
Enables or disables the internal WLAN device.
Default: ON
Enables or disables the internal Bluetooth® device.
Default: ON
Enable or disable UEFI Network Stack.
Default: ON