Installing The Media-Card Reader - Dell Vostro 3020 Service Manual

Steps
1. Remove the two screws (M3x5) that secure the media-card reader bracket to the system board and the chassis.
2. Push the media-card reader bracket to release it from the chassis
3. Slide and lift the media-card reader and the bracket off the system board.

Installing the media-card reader

Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the media-card reader and provides a visual representation of the installation
procedure.
Removing and installing components 33