Advertisement
2 PITCH
Turn the OSC PITCH knob to adjust the PITCH of the main
oscillator. A modulation signal can be connected to the
PITCH MOD socket and the PITCH MOD knob controls the
amount of the modulation.
3 MODULATION
Turn the OSC TIMBRE knob to adjust the PITCH of the
modulating oscillator.
A modulation signal can be connected to the TIMBRE MOD
socket and the TIMBRE MOD knob sets the amount of the
modulation.
4 WAVESHAPE
Turn the WAVESHAPE knob to adjust the 3rd parameter of
the sound. A modulation signal can be connected to the
WAVESHAPE socket to modulate this parameter. The
WAVESHAPE also sets the pulse width of the OSC PULSE
output.
5 OSC OUT
This patch point on the device can be either used as
another signal for your patch or when any other output is
connected to this output it will be passively mixed with the
oscillator output and will go to the OUT jack. This is most
useful for adding more power by connecting the
SECONDARY OSC OUT.
6 SECONDARY OSC OUT
The SECONDARY OSC OUT provides an alternative
waveform based on the secondary modulating oscillator
and the waveform can be adjusted by the WAVESHAPE
parameter. It can be either used to modulate parameters
within the Kastle synth or patched to the OSC OUT socket
Advertisement
