Advertisement
INSTRUCTIONS
Kastle is a mini modular synth and as in every modular
synth the sounds are programmed by connecting outputs to
inputs.
Outputs are labeled by a silver outline around the patch
points. Inputs don't have the silver outline.
Feel free to also connect inputs with inputs and outputs with
outputs. Nothing bad will happen. And sometimes
something interesting can happen with strange
connections!
0 POWER UP
Find a microUSB cable or go to your nearest store and buy
3 AA batteries. You can catch Pokemons on the way,
though you don't have to, but the important thing is that on
average you will burn 50 calories. Also, not shipping the
batteries to you from us is environmentally friendly.
Connect the USB cable to a powered 5V USB socket or
insert the batteries to the battery compartment the right way
- as indicated on the battery holder.
Flip the power switch to the USB or BATT position based on
which power source you are using. There is a LED close to
the LFO RATE knob which should light up. If it doesn't it
means the USB socket is not powered or you connected
the batteries in a wrong way or they are completely
depleted.
1 OUT
Use the OUT jack to connect your headphones or an audio
cable from your speaker system. The main output of the
complex oscillator is routed to the OUT jack.
Advertisement
