Advertisement
Di erent rise and fall times
Connect the LFO PULSE to the RATE MOD socket. Now
the RATE MOD and LFO RATE knobs set di erent
proportions between the rise and fall time of the triangle.
This will also create a swing e ect on the STEPPED
waveform. You can also use the STEPPED output to
connect to the RATE MOD socket to change the slope time
with every new voltage generated at the STEPPED output.
Thick sound
Connect the SECONDARY OSC OUT to the OSC OUT
socket to mix both oscillator waveforms
together. This can result in a really thick sound which is
great for further filtering.
Sync
The LFO and STEPPED generator on Kastle can be synced
with other gear. You can use the LFO PULSE out when you
want Kastle to be the master clock or connect clock from
another device to the LFO RST when you want it to be the
slave. Simply connect the I/O jack to your device and patch
the L socket to the LFO RST or LFO PULSE.
Connect everything to everything !
There are several connections that might surprise you while
exploring the sounds. Here are a few of the ones you should
try out for sure:
● Connect SECONDARY OSC OUT to the BIT IN to
create varying random patterns.
● Connect SECONDARY OSC OUT to any of the OSC
inputs to see what happens.
● Connect any LFO signal to the MODE pin to change the
synthesis mode on the go.
Advertisement
