Great Little Trading L5196 Manual

Great Little Trading L5196 Manual

Clip on bedside table

Advertisement

Clip on Bedside Table
L5196
Assembly Difficulty
one-person job
easy -
medium- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
V2
25/05/2021
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L5196 and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading L5196

  • Page 1 Clip on Bedside Table A few important pointers before you start: L5196 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Page 2: Safety Warnings

    Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Unassembled product contains small parts which may present a Customer Services on 0344 848 6000 immediately.
  • Page 3: Component Checklist

    Component Check List Hardware Check List 6x Cam Locks 6x Cam Dowels 1x Back Panel 1x Side Panel 4x Screws 9x Screws (12mm) (25mm) 1x Upstand Side Panel 1x Side Panel 2x Cushion Pads 2x Protective Foam Stickers You will need (not supplied) 1x Upstand Front Panel 1x Base Panel...
  • Page 4 Hardware for Step 1: Hardware for Step 2: Using Cam Locks: 2x #1 Cam Locks 2x #1 Cam Locks When inserting into the panel, ensure that each cam lock’s arrow is pointing towards the drill hole on the side edge of the panel &...
  • Page 5 Hardware for Step 3: STEP 4: Orientate base panel (F) ensuring that the countersunk pilot holes are at the underside and the soft shaped corners are at the front. Bring the upper structure 2x #1 Cam Locks together with the top of base panel (F) and align the drill holes. Secure with x9 screws (25mm) (#4).
  • Page 6 Attach the x2 shelf hooks (G) to back panel (A) with x4 screws (12mm) (#3). 2x #5 Protective Foam Stickers 2x #6 Cushion Pads Copyright© 2021 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents