Great Little Trading L5166 Quick Start Manual

Great Little Trading L5166 Quick Start Manual

Wooden play & shop cafe

Advertisement

Quick Links

Wooden Play & Shop Cafe
L5166
Assembly Difficulty
one-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.

A few important pointers before you start:

Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
V1
26/04/2021
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L5166 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Great Little Trading L5166

  • Page 1 Wooden Play & Shop Cafe A few important pointers before you start: L5166 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Page 2 Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Not suitable for children under 3 years due to small parts that may Customer Services on 0344 848 6000 immediately.
  • Page 3 Component Check List 16x Screws 30mm 18x Barrel nuts 18x Bolts 4x Screws 21mm 4x Bolts 4x Bolts You will need (not supplied) 2x Allen Keys Phillips Head Screwdriver...
  • Page 4 STEP 1: Hardware for Step 1: Hardware for Step 3: Attach 4x feet (part B) onto panel A using 8x screws (#1). 8x #1 Screws 30mm 2x #2 Barrel nuts 2x #3 Bolts STEP 3: Attach panels D (2x) to panel C using 2x barrel nuts (#2) and 2x bolts (#3) Ensuring the front ledge is facing the correct way.
  • Page 5 Hardware for Step 5: Hardware for Step 7: 2x #2 Barrel nuts 1x #1 Screw 30mm 2x #3 Bolts STEP 5: STEP 7: Carefully turn the shop on its side, onto panel C. Secure part H to side panel using 1x screw (#1). Attach panel G to the base panel A using 2x barrel nuts (#2) and 2x bolts (#3).
  • Page 6 Hardware for Step 11: Hardware for Step 9: 2x #1 Screws 30mm 2x #4 Screws 21mm STEP 11: STEP 9: Attach part L to panel K using 2x screws (#1). Secure panel I using 2x screws (#4). Hardware for Step 10: Hardware for Step 12: 2x #1 Screws 30mm 1x #1 Screw 30mm...
  • Page 7 STEP 15: STEP 13: Insert panel K into the top Attach part L to panel N using 2x screws (#1) of panel J (worktop). Secure panel K using 2x bolts (#5) and 2x bolts (#6) using the Allen Key (#7) provided to tighten them together.
  • Page 8 (K &N). Now go back and secure the bolts and nuts from step 18, tighten panel P. Copyright© 2021 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents