Great Little Trading L5115 Manual

Great Little Trading L5115 Manual

Shaker peg rail, colour pop

Advertisement

Shaker Peg Rail, Colour Pop
L5115
Assembly Difficulty
one-person job
easy
- medium - hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.

A few important pointers before you start:

Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
It's a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it's been assembled.
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Wall fixings not included. Please use appropriate fixings that are
suitable for the wall type. If in doubt, please seek professional advise.
V1
06/11/2020
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L5115 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Great Little Trading L5115

  • Page 1 Hopefully our efforts will have been worthwhile and you’ll sail Shaker Peg Rail, Colour Pop through the whole process. But if it all feels a bit too much L5115 like hard work, then we do have an assembly company we can recommend: the Flatpack Construction Company offers a nationwide service and can be contacted on 0843 289 4951 or www.flatpackconstruction.co.uk.
  • Page 2 Safety Warnings: Customer Service: • PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • Adult assembly required. Customer Services on 0344 848 6000 immediately.
  • Page 3 Component Check List STEP 1: Hardware for Step 1: Attach 6x wooden pegs (#1) to panel A using 6x screws (#2). x6 #1 Wooden Pegs Back Board Shelf Panel x2 #2 Screws Wooden Pegs Screws Cam Dowels Cam Locks You will need (not supplied) Phillips Head Screwdriver...
  • Page 4 * Please note: Turn cam locks 180 degrees or until tight. STEP 3: Attach panel A to panel B using 3x cam locks (#4). Copyright© 2021 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents