Table of Contents
Advertisement
-
Select Set in the popup to see the number update in the die alignment grid.
-
Note that Die Alignment does not have the "Apply Preview" that was available in Die
Leveling.
-
Touch the Save button to save the die alignment settings. Print the Quick Print to verify
your results.
-
Repeat the process as needed. Once you are satisfied with the results, touch the Save
button again to permanently save your final changes to the printer.
Notice the More... button. The following additional options are available.
-
Refresh View – Refresh the view, in case the values have been changed elsewhere, i.e.,
the printer web server view.
Reset – Reset the values to all zeroes.
-
Factory Defaults – Reset the values to the original values set at the factory.
-
Figure 8-27. Die Alignment for Narrow Bands
8-58
Advertisement
Table of Contents
Troubleshooting
