Load Setup Defaults; Integrated Peripherals Setup - Pine Technology TL-BX31 User Manual

3.6

LOAD SETUP DEFAULTS

This Main Menu item loads the default system values. These settings are recommended for
optimum performance. If the CMOS is corrupted when enter BIOS setup utility you must load
setup default again. Choose this item and the following message appears:
To use the Setup defaults, change the prompt to "Y" and press <Enter>.
3.7

INTEGRATED PERIPHERALS SETUP

The "INTEGRATED PERIPHERALS" is used to control the values of the I/O chipset registers.
These registers control the mode of HDD type and I/O address port.
Run the Integrated Peripherals as follows:
1. Choose "INTEGRATED PERIPHERALS" from the Main Menu and a screen with a list .
"Load "SETUP Defaults (Y/N)? N"
INTEL PII
User's Guide
36