Pine Technology TL-BX31 User Manual page 37

1. After you have finished with the PCI Slot Configuration program, press the <ESC> key and
then follow screen instructions to save or disregard your settings.
PNP OS Installed (YES)
-This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus
slots instead of using this BIOS. Thus interrupts may be reassigned by the OS when YES is
selected. When a non-PnP OS is installed or to prevent reassigning of interrupt settings, select
the default setting as "YES".
Resources Controlled By (Manual/Auto)
-setting this option to manual allows you to individually assign the IRQs and DMAs to the ISA
and PCI devices. Set this to AUTO to enable the auto configuration function.
Reset configuration Data
-Incase conflict occurs after you assign ths IRQs or after you configure your system, you can
enable this function, allow your system to automatically reset your configuration and reassign the
IRQs.
Used MEM Base address
-this item, in conjunction with the "Used MEM Length", lets you set a memory space for non-
PnP compatible ISA card. This item specifies the memory base (start address) of the reserved
memory space. The memory size is specified in the "Used MEM length".
Used MEM Length
-If your ISA card is not PnP compatible and requires special memory space to support its
function, specify the memory size in this parameter to inform the PnP BIOS to reserve the
specified memory space for installed legacy ISA card.
INTEL PII
User's Guide
35