Pine Technology TL-BX31 User Manual page 20

CMOS state (JP11)
JP11
1-2
2-3
Wake-on-LAN Connector (P9)
The Wake-on-LAN connector powers up the system when a wakeup packet or signal is received from
the network tthrough the INTEL L101 LAN card:
INPORTANT: This feature requires that the Wake-on-LAN Power up control BIOS is set to Enabled
and that your system has an ATX power supply with +5V standby power.
WAKE-LAN(P9)
Pin
1
2
3
What is Wake-on-LAN?
The Wake-on-LAN feature provides the capability to remotely power on systems supporting
Wake-on-LAN by simply sending a wake-up frame. With this feature, remotely
uploading/downloading data to/from systems during off-peak hours will be feasible.
Wake-on-LAN is a remote management tool with advantages that can reduce system
management workload, provide flexibility to the system administrator's job, and then of course
save your time-consuming efforts and costs.
To enable Wake—on-LAN function, your system requires Ethernet LAN adapter card that can activate
Wake-on—LAN function, a client with Wake-on-LAN capability, and software such as LDCM rev3.10 or
up that can trigger wake-up frame.
CMOS Setting
Normal operation
Clear CMOS
Description
+5V Standby
GND
NC
INTEL PII
User's Guide
19