Table of Contents
Advertisement
g. Repeat steps a-f to fasten the other mounting rail.
h. Make sure that both rails are mounted at the same vertical position on both sides of the rack.
5. Slide the tray into the rack.
The rails will click and lock into place when the tray is properly engaged.
Install the HPE StoreEasy 1560 Storage into the rack
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1. Grasp the tray notch and extend the tray out of the rack.
1
2
3
17
Setup and install
Advertisement
Table of Contents
