HP HPE StoreEasy 1000 Getting Started Manual page 15

c. Repeat steps a–b on the other rail assembly.
2. Install the sliding rails on the tray:
a. Align the notches on the rail with the pins on the side.
b. Slide the rail towards the rear of the tray to lock it into place.
1
c. Repeat steps a–b on the other inner rail.
3. Locate the orientation markers on the mounting rails:
The front end of the rails is marked FRONT.
•
The rear end of the rails is marked with L for left and R for right.
•
3
1
2
2
1
1
Setup and install
15