Specifications - Makita DJR141 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Lever
3-2. Shoe

SPECIFICATIONS

Length of stroke
Strokes per minute(min
Max. cutting capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic and ferrous
materials.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting wooden beams
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
4-1. Lock-off button
4-2. Switch trigger
5-1. Blade clamp sleeve
5-2. Released position
5-3. Fixed position
6-1. Blade
Model
-1
)
Pipe
Wood
Overall length
Net weight
Rated voltage
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
2
) : 8.5 m/s
h,B
2
2
) : 8.5 m/s
h,WB
2
ENE020-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
We Makita Corporation as the responsible manufacturer
declare that the following Makita machine(s):
Designation of Machine:
Cordless Recipro Saw
Model No./ Type: DJR141
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
ENG901-1
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3
7-1. Blade clamp sleeve
9-1. Limit mark
10-1. Brush holder cap
10-2. Screwdriver
DJR141
23 mm
0 - 2,700
90 mm
90 mm
466 mm
3.1 kg
D.C. 14.4 V
ENH101-16