fi nishing
EN
Check if the GGA-1 plane is straight. Adjust with horizontal adjustment screws on both ends, if necessary
12.
(Fig. 16).
Move forward
Move forward
Check if the latches are correctly positioned (Fig. 17). Adjust latches, if necessary. Retighten the screws
13.
securely but do not overtighten.
72
W415-2035 / C / 04.30.21
Fig. 16
Latch too high -
won't disengage
Fig. 17
note:
If facing material is not installed plumb and square,
it may be necessary to make fi nal horizontal GGA-1
adjustments after fi nishing.
Latch too low -
won't engage
Fig. 18
Fig. 19