Sending A Fax - Muratec MFX-1450 Quick Reference

Sending a fax

1
Set the document in the ADF or on the document glass.
ADF � Face UP
2
Press <FAX> to display the Fax standby mode.
3
Set each function as necessary. (ex. Resolution, Contrast).
4
Specify the destination fax number.
NOTE
When you enter the fax number, [Location] is displayed on the display. To
check or delete the entered number, press [Location].
Using the numeric keys

Enter the destination number using the numeric keys and press [Enter].
• Up to 40 digits can be entered.
• If you enter an incorrect number, press [Clear] and delete it.
• You can enter the dialing characters.

DA7-909K0-60.indb 18
Document glass � Face DOWN
2007/04/27 13:41:23