Put The Helmet Off; Operating Instructions - BRP EXOME User Manual

C. FIT & USAGE

3. PUT THE HELMET OFF

1. Make sure the sun visor is retracted.
2. Move the neck protector outward to clear the opening.
3. Turn the helmet jaw to the open position.
4. Open the breath ventilation system.
5. Open the chinstrap and chinstrap comfort pad.
6. Pull apart the lower ends of the chinstrap.
7. The helmet can now be removed easily.
To avoid scratching any objects you might place the helmet on, we
recommend closing the chin-strap after you have taken the helmet off.

4. OPERATING INSTRUCTIONS

CONNECTING THE POWER CABLES
We highly recommend that you get your helmet cables connected by an
authorized BRP dealer so that he can refer to the vehicle's shop manual to
determine the best connection point.
1. Vehicle Connection
• Option 1a: Via the vehicle's power outlet intended for this purpose (sold
separately).
For more details, see your authorized BRP dealer or distributor.
• Option 1b: Via the battery power outlet intended for this purpose (sold
separately).
For more details, see your authorized BRP dealer or distributor.
It is important not to connect the helmet to another electrical accessory
(like heated grips) to avoid overloading existing circuits. This could lead to
a fire.
WARNING
2. Power cable (vehicle side)
• Connect the vehicle power cable to the main power outlet (1a or 1b) and
leave it in position for further use.
3. RCA power cable
• Then, place your riding coat on a clean surface and route the RCA
power cable as shown below:
17