Ld0.Srgapc2 Multipurpose Binary Outputs - Flip-Flop Resets (2); Analog Inputs; System Functions; Ctrl.lln0 Local Remote Station Off - ABB Relion 620 Series Manual

Section 2
DNP3 data mappings
2.4.7.6
Table 140:

LD0.SRGAPC2 Multipurpose binary outputs - flip-flop resets (2)

IEC 61850 name
LD0.SRGAPC2
.Rs1.ctlVal
.Rs2.ctlVal
.Rs3.ctlVal
.Rs4.ctlVal
.Rs5.ctlVal
.Rs6.ctlVal
.Rs7.ctlVal
.Rs8.ctlVal
2.5
2.5.1
2.5.1.1
Table 142:

CTRL.LLN0 Local remote station off

IEC 61850 name
CTRL.LLN0
.LocRem.stVal
60
LD0.SRGAPC2 Multipurpose binary outputs - flip-flop resets (2)
SA name
-
-
-
-
-
-
-
-

Analog inputs

Table 141: Explanations of the analog input table columns
Column name Description
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as
name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical
Node is the same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information.
Values The value range of the original IEC 61850 data. Scaling is needed to convert
floating point data into DNP3 integer values.
S Scaling type selected as default. Default "R" means ratio scaling. See the DNP3
communication protocol manual for details.
Arg 1, 2, 3, 4 Scaling argument values as default. When ratio scaling is selected, the four
values correspond to min value in, max value in, min value out, and max value
out. See the DNP3 communication protocol manual for details.

System functions

CTRL.LLN0 Local remote station off
SA name Description
Off=0; Loc=1; Rem=2;
- Station=3
Description
Reset flip-flop 1
Reset flip-flop 2
Reset flip-flop 3
Reset flip-flop 4
Reset flip-flop 5
Reset flip-flop 6
Reset flip-flop 7
Reset flip-flop 8
Values
0...3
1MRS757660 A
Type
On
On
On
On
On
On
On
On
S Arg 1,2,3,4
R 0,3,0,3
RET620
Point List Manual