Multitech RouteFinder RF825-C-Nx Quick Start Manual page 5

Quick Start Guide
CDMA & EDGE Back Panel
CDMA-AP & EDGE-AP Back Panel
Connector Description
GSM/EDGE 2 dBi cellular antenna connector.
Antenna Note: The antenna must be attached in order for the
Connector
RouteFinder to be operational.
Handset Connector for a handset.
WAN WAN (10/100BaseT) port connects the DSL modem or
cable modem.
LAN Ports There are 4 LAN ports. You can connect to PCs, FTP
servers, printers, or other devices you want to put on
your network.
+9 Volt to RouteFinder power source can range from 9 volts to
32VDC 32VDC.
Reset The Reset button resets the RouteFinder to its factory
defaults. Press and hold the button until the Status LED
blinks, and then release it. Do not press this button
unless you want to restore all settings to the factory
defaults.
802.11 2.4 GHz 5dBi SWI-Reverse-F antenna connector.
Note: The antenna must be attached in order for the
RouteFinder to be operational.
RouteFinder RF825 Series
5