RouteFinder RF825 Series
Front and Back Panels
CDMA Front Panel
EDGE Front Panel
LEDs
Description
Power
Lights when power is being supplied to the RouteFinder.
Status
When functioning normally, the LED blinks. The LED is a
solid light when the RouteFinder is booting up, saving the
configuration, restarting, or updating the firmware.
LAN
Lights when a successful connection to the 100BaseT LAN
10/100M
is established. Off when connected to the 10BaseT.
LAN Link/
Lights when the LAN port has a valid Ethernet connection.
ACT
Blinks when it is receiving or transmitting data.
WAN
Lights when a successful connection to the 100BaseT
10/100M
WAN is established. Off when connected to the 10BaseT.
WAN Link/
Lights when the WAN port has a valid Internet connection.
ACT
Blinks when it is receiving or transmitting data.
Modem
TD
Transmit Data. Blinks when the modem is
transmitting data to your wireless carrier.
RD Receive Data. Blinks when the modem is receiving
data from your wireless carrier.
CD Carrier Detect. Lights when the modem detects a
valid carrier signal from a wireless carrier.
TR
(Data) Terminal Ready. Lights when the modem is
trying to establish a wireless connection.
LS
Link Status.
EDGE: Blinks when there is network activity between
carrier and cellular module. Otherwise, light will be off.
CDMA: Continuous "on" – The wireless modem is
not registered on the network.
Flashing – Network registration OK.
Off – Modem is off (not ready) or in download mode.
4
Quick Start Guide