Introduction - Multitech RouteFinder MTASR2-201 Quick Start Manual

DSU RouteFinder Quick Start Guide

Introduction

Welcome to Multi-Tech's new DSU RouteFinder, Model
MTASR2-201, which provides secure and seamless LAN-to-
LAN routing capability and can also provide dial-up capability.
This unit supports multiple WAN services and supports a wide
range of routing protocols including IP, IPX, TCP, and RIP
version 2. When the WAN 2 port is configured to support it,
this unit also supports a secondary capability of dial-up
Remote Access Server (RAS) access for telecommuters and
mobile users from any Point-to-Point Protocol (PPP) or Serial
Line Internet Protocol (SLIP) networking client.
The DSU RouteFinder features a 10BaseT port for local LAN
connection, a command port for configuration, a 56K bps DDS
4-wire WAN connection, and an RS232/V.35 port for an
optional Data Communications Equipment (DCE) device (i.e.,
external modem, T1/E1 CSU/DSU, etc.). System management
is provided through the command port using bundled
®
Windows
configuration menus.
* Some DSU RouteFinder units may be marked "MultiRouter"
or "MultiRouter 200-Series"; they are equivalent to the "DSU
RouteFinder" referred to throughout this quick start guide.
4
based software which provides easy-to-use
Figure 1. DSU RouteFinder