Supermicro H12DSU-iNR User Manual page 108

H12DSU-iNR User's Manual
SATA Configuration
This section displays the detected SATA devices installed on the system.
SATA Enable
This setting enables or disables the on chip SATA controller. The options are Enabled,
Disabled and Auto.
SATA Hot Plug
This setting enables or disables the on chip SATA hot plug feature. The options are Disabled,
and Enabled.
SATA Information
This section displays information on the detected SATA devices:
• SATA0 – SATA17
HTTP Boot Configuration
HTTP Boot Policy
The default setting is Apply to each LAN.
HTTP Boot Checks Hostname
Selects whether HTTPS Boot checks the hostname of TLS certificates matches the
hostname provided by the remote server. The default setting is Enabled. WARNING:
Disabling this option is violation of RFC 6125 and may expose you to Man-in-the-Middle
attacks!! Supermicro is not responsible for any and all security risks incurred by you
disabling this option.
Instance of Priority 1:
Displays the number of Priority 1 boots.
Select IPv4 or IPv6
Allows you to choose. The default setting is IPv4.
Boot Description
Boot URI
A new Boot Option will be created according to this Boot URI. It is only supported on Dual
or EFI Boot Mode.
108