Table of Contents
Advertisement
H12DSU-iNR User's Manual
Quick Reference Table
Jumper
JBT1
JWD1
LED
UID_LED
BMC_HB LED
PWROK LED
Connector
JIPMB1
BT1
VGA
UID_SW
COM1
IPMI_LAN
USB0/1 (3.0)
USB3/4 (3.0)
USB2 (3.0)
FAN1~FAN8
JCPLD1
FP1
JF1
P1_NVME0/1 SATA0-7
P1_NVME2/3
P2_NVME0/1 SATA10-17
P2_NVME2/3
SATA8~9
JSD1-2
JNCSI1
JL1
JSEN1
GPU PWR1-3
BP PWR1-4
JTPM1
PSU1/PSU2
SXB1A/1B/1C
SXB2
SXB3A/3B/3C
Note: Jumpers in the table not described are for manufacturing testing purposes only and
are not covered in this manual.
Description
CMOS Clear
Watch Dog
Description
UID LED
BMC Heartbeat LED
Power LED
Description
4-pin External I
C Header (for an IPMI card)
2
Onboard Battery
VGA Port
UID Switch
COM Port
IPMI LAN
USB0/1 (3.0) Rear Side Connector
USB3/4 (3.0) Front Side Pin Header
USB2 (3.0) Type A Connector
4-pin System/CPU Fan Headers
Complex-Programmable Logical Device (CPLD) header
Front Panel Connector
Front Control Panel Header 1
Processor 1 NVMe Ports 0/1 / SATA 0~7
Processor 1 NVMe Ports 2/3
Processor 2 NVMe Ports 0/1 / SATA 10~17
Processor 2 NVMe Ports 2/3
SATA 3.0 Ports
Disk-On-Module Power Connector
NCSI
Chassis Intrusion Header
Inlet Sensor Header
12V 8-pin Power Connector for Riser Card GPU
12V and 5V 8-pin Power Connector for Backplane
Trusted Platform Module/Port 80 Connector
Serverboard Main Power Supply Connector
WIO-L Riser Card Support (CPU2 PCIe 4.0 x32)
WIO-R Riser Card Support (CPU2 PCIe 4.0 x16)
Ultra I/O Riser Card Support (CPU1 PCIe 4.0 x40)
Default Setting
Open (Normal)
Pins 1-2 (Reset)
Status
Solid Blue: UID Switch On
Green: Blinking (BMC normal)
Green: Fast blinking (BMC initializing)
Solid Green: Power On
12
Advertisement
Table of Contents
