Product Certifications - Emerson Rosemount 2160 Quick Start Manual

Quick Start Guide
4

Product certifications

Rev. 4.9
4.1 European directive and UKCA regulations information
A copy of the EU/UK Declaration of Conformity can be found at the end of
this document. The most recent revision of the EU/UK Declaration of
Conformity can be found at Emerson.com/Rosemount.
4.2 Ordinary location certification
As standard, the device has been examined and tested to determine that the
design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
4.3 Environmental conditions
Table 4-1: Environmental Conditions (Ordinary Location and Low
Voltage Directive (LVD))
Type
Location
Maximum altitude
Ambient temperature
Pollution degree
4.4 Telecommunication compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification. Emerson is working with
governmental agencies around the world to supply fully compliant products
and remove the risk of violating country directives or laws governing
wireless device usage.
4.5 FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions: This device may not cause harmful interference
and this device must accept any interference, including any interference that
may cause undesired operation of the device. This device must be installed
to ensure a minimum antenna separation distance of 8 in. (20 cm) from all
persons.
24
Description
Indoor and outdoor use
6562 ft. (2000 m)
-58 to 185 °F (-50 to 85 °C)
2
Rosemount 2160 Wireless Level Detector
November 2022